Description
This model is made for the high speed on road runs and has a -1 degree toe which is the desired toe setting by our test team for best handling at high speeds.
Made using 7075-t6 material and polished. This system is designed to transmit the energy of a crash around the blocks and take pressure off the bulkheads. The “d” block is locked into the the rear end from the bottom to ensure that nothing can move. The lock nuts prevent the blocks from spreading and putting pressure on the diff cases.
The (4) small 4 mm plastic spacers are to act as a cushion and not damage the blocks.
NOTE: YOU CANNOT COMBINE THIS SUSPENSION WITH THE STOCK SUSPENSION SYSTEM AS THE STOCK HINGE PINS WILL NOT WORK.
NOTE: These pins are designed to float. this will allow the arms and pins to rotate in bushing. Lock tight the small nut, then screw the lock nut on until it bottoms out. No need to over tighten the lock nut.
MINOR MODIFICATIONS TO STOCK PLASTIC PARTS ARE REQUIRED TO FIT LIMITLESS / INFRACTION
Assembly Instructions
